Coated aluminum plates take you a shortcut to shorten the construction period

2021-08-28 18:44:30

  1. High construction efficiency and short cycle: The aluminum alloy building formwork system is a quick-release mold system, which can be removed in 18-36 hours, so only one layer of aluminum formwork and three layers of single supports are required to meet the requirements. Normal construction can be used. Up to 4-5 days for the first floor, thus greatly shortening the construction period, saving management costs for the construction unit, and shortening the development cycle for real estate developers.

  2. Reusable and low cost: all parts of the aluminum formwork system can be reused. The aluminum formwork system uses integral extrusion to form aluminum alloy profiles as raw materials (6061-T6). Low cost of use.

Coated aluminum plates

  3. Convenient construction and high efficiency: The aluminum formwork system is simple and convenient to assemble. It only needs to increase the standard board proportionally during installation. The aluminum formwork is light in weight of 18-25 kg per square meter. The construction process is completely assembled and transported manually, and does not rely on lifting Mechanical equipment (workers usually only need a wrench or a small hammer for construction, which is convenient and quick). Installers can install 20-30 square meters per person per day (aluminum formwork installers can save 30% compared with wooden formwork, and no technicians are needed. It is sufficient to carry out a simple training for the construction staff for 1 hour before installation). To

  4. Good stability and high bearing capacity: The aluminum formwork system is all assembled by aluminum formwork. After the system is assembled, it will form an overall frame with good stability. The bearing capacity can reach 60KN per square meter, and there will be no mold expansion accidents. .